How to Install an ATV Electric Winc...
How to Install an ATV Electric Winches
Dec 20, 2010 2:26:30 PM
ATV electric winches are one kind of mechanical device that is used to wind up or wind out your objects such as cars, and motors. Besides its industrial applications, ATV electric winches are used for towing cars, boats, or gliders. There are several winches on almost every boat or ship where they are used to pull anchor or mooring lines, halyards, and sheets.The installation process for ATV electric winches is different for all ATVs, but the wiring process will be almost the same. See the following:
1. Guide the thick black power wire from theATV electric winches to the battery. ATV batteries are commonly installed under the seat. Use the same path as the light wiring. The light wires will lead you straight to the capacitor connected to the battery.
2. Mount the ATV electric winches on/off switch to the handle bar using the brace attached to the switch. Loosen the screw on the brace using the screwdriver and then tighten the screw once the switch is in the place that you want it. Guide the switch wire to the battery along the same path as the other ATV electric winches wires.
3. Loosen the converter screw on the converter. Insert the ATV electric winches power wire into the converter and tighten the screw. Loosen the screw on the converter for the switch wire and insert the switch wire into the converter. Tighten the screw.
4. Loosen the connector on the converter labeled "Power" using the screwdriver. Place the converter onto the positive power stem on the battery and tighten the screw. Start the ATV electric winches s engine and try out your winch.
